Home / Components for building and retrofitting / CNC control systems / Control system PIERCE

Control system PIERCE

 

View product leaflet (PDF): ENcz_kontoler_PIERCE_big

 

 

 

 

 

 

 

BURNY 10 LCD plusB10LCDplus

System parameters

  • able to control following processes: oxy-fuel, plasma arc and water jet cutting and other additional technologies
  • based on WINDOWS XP
  • built-in RCS++® ( Real Time Control System)
  • integrated own diagnostics – monitors position and time when moving
  • operated by hand touch on screen
  • remote system diagnostics is possible to conduct by means of company intranet
  • multitasking function enables preparing data when cutting
Operating function

  • cutting in manually or automatic mode
  • testing modes: continuous, step by step
  • backward running when cut with automatic cutting oxy switch-off lost
  • torch setting-off in requested length (plate cutting)
  • setting right the program against slewed plate
  • go on position function: Start program, End program, Requested piercing, Back to cut
  • software HOME position (Start sheet panel)
  • hardware HOME position (re-entry into cut at outage)
  • Possible stop working and following continuation
Standard shapes

  • 50 standard shapes + 100 other variants
  • automatic nesting in lines, columns or under angle
  • chain cutting for selected shapes
  • common cutting for selected shapes
  • possible creation of own shapes
Display

  • current speed
  • program speed
  • speed percent indication
  • X and Y axis position (absolute, relative )
  • program part name
  • active mode
  • X,Y,I,J – dimensions with 0.001 accuracy
  • error reporting
  • graphic display with ZOOM + – 64x
Design

  • industrial design ( dustproof case )
  • 15′ colour LCD monitor
  • touch screen
  • membrane buttons START, STOP, BACK UP, GOTO
  • 8 – direction joystick
  • USB port, covered Floppy Disc Drive
Working conditions

  • temperature 0-50°C
  • humidity 95% incondensating
Hardware specification

  • Intel processor Intel 2 GHz
  • main memory DIMM – 1 GB
  • hard disk – 80 GB
  • 15′ colour LCD touch screen
  • USB port, Floppy Disc Drive
Program functions

  • metric or inch units
  • various program formats (ESSI, EIA RS)
  • program editing
  • program conversion
  • program scale
  • program rotation
  • program reflection
  • rows and columns definition
  • sheet dimension setting
  • message insertion into program
  • cut compensation
  • cutting speed
  • piercing delay
  • preheat time with memory
  • automatic tool setting-offnástrojů
Additional functions

  • wireless communication
  • optical cable communication
  • machine operation Manager
  • DXF file loading
  • automatic nesting
  • piercing ramp definition
  • initiation of own applications
Communication

  • floppy drive
  • RS 232 * serie line
  • connecting with company intranet *
  • internet – TCP/IP protocol*
  • USB port

BURNY 2.5 plusB2.5plus

Basic equipment

  • membrane keyboard
  • keyboard sound indication
  • 16 – point display
  • 2-axis operating (3-axis)
  • 50 standard shapes
  • program transfer from PC into controller via RS 232 and RS 422 serial interface
  • storing controller program into PC
  • creating and editing the programs by keyboard
  • kerf compensation setting
  • manual, automatic or testing mode selection
  • material preheat set-up time
  • pasma and oxy-fuel cutting delay set-up time
  • display speed indication
  • display instantaneous torch position indication
  • automatic acceleration and deceleration in angles
  • return into initial position
  • magnification and reduction in scale from 0,001 up to 65
  • automatic program adaptation against situated plate
  • mirror copy in both axis
  • program rotation with 0,01 degree increase
 
 
 
Main Menu